Gorilla Clear Grip Contact Adhesive 75g

Gorilla Clear Grip® is a flexible, fast-setting, crystal clear contact adhesive that creates a strong, permanent bond. Gorilla Clear Grip® is paintable and waterproof making it great for projects both inside and out!

WATERPROOF – For indoor/outdoor use
FAST GRAB – Holds in just seconds
PERMANENT BOND
FLEXIBLE
CRYSTAL CLEAR
HEAVY DUTY
NO-RUN FORMULA
PAINTABLE
PHOTO SAFE
WASHER & DRYER SAFE
BONDS: Metal, Glass, Fabric, Wood, Ceramic, Leather, Paper, Plastic*, and More!
*Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.

DIRECTIONS
All surfaces should be clean and free of dirt, grease and oil. Best if used between 50°F and 90°F. Clear Grip® should only be used in a well ventilated area.
Apply adhesive to each surface to be bonded.
To maximize bond strength: Wait approximately two minutes for adhesive to partially dry before joining surfaces.

Press surfaces firmly together.
NOTE: Bond forms immediately and can be difficult to reposition.

Cure Time
Allow for a minimum of 24 hours for full cure. Cure time may increase with lower temperatures and when used on non-porous surfaces.

Storage Tips
After each use, wipe nozzle with a dry cloth and tightly replace cap. Store in a cool, dry location. Tip: For easier re-opening, apply a thin coat of petroleum jelly to the threads before replacing cap. Store away from children and animals.

Clean-up
Wipe uncured adhesive with a dry cloth and clean with acetone, isopropyl alcohol, or citrus based solvents according to manufacturer’s instructions. Cured adhesive may be removed by scraping from surface.

Paintable
When fully cured.

*NOTE: Not recommended for use on polystyrene, polypropylene or polyethylene products. Not for use on food contact surfaces. Do not dry clean. May cause damage to finished surfaces.

TECHNICAL SPECS
APPLICATION TEMPERATURE – 50° to 90° F, best at room temperature

OUTDOOR – Yes

MOISTURE RESISTANT – Waterproof

PAINTABLE – Yes – Can be painted with water and oil based paints, spray paint

SANDABLE – Yes

STAINABLE – Yes

CURED COLOR – Clear

STORAGE TIPS – Flammable adhesive, do not use or store near heat, sparks, flames, or while smoking. Store in a cool, dry location. Wipe nozzle clean before replacing cap, for easy re-open apply a thin coat of petroleum jelly to threads.

GAP FILLING – No

PHOTO SAFE – Yes

WASHER & DRYER SAFE – Yes